|Printers > Printer > TallyGenicom|
Genicom 3840EP Printer
Mfg Part#(s): 3S3841AAA020C4
Product Condition & Pricing
|• Usually Ships Same Day|
|• 180 Day Warranty|
|High Speed Impact Dot Matrix Printer|
Genicom 3840EP Printers - Change Jobs, Not Paper with a pantented dual paper handling system!
Ideal for dedicated printing requirements - just set up and run. Even prints up to 6 part invoices! Suitable for heavy-duty printing applications with a recommended workload up to 27,000 pages per month.
Features of the Genicom 3840EP Printer
Genicom 3840EP Printers Have Features That Make Tough Jobs Easier
Patented, dual paper handling system
Load two different continuous forms and switch between them.
Automatic forms thickness sensing and adjustment (3840EP only).
Zero-inch tear-off, automatic paper park, and automatic top of form.
Control panel lockout feature to prevent unwanted changes in print job.
Genicom 3840EP Printer Fits Your Needs
SmartGraphics (IGP/QMS) models.
Typical Applications of the Genicom 3840EP Printer
Shared-resource or network environments
Multipart forms, bar codes, labels
Warehouse, purchase orders
Technology: Serial impact dot matrix
Bar Codes: Interleaved 2 of 5, Bidirectional 2 of 5, Matrix 2 of 5, Industrial 2 of 5, Code 3 of 9, EAN-2, EAN-5, EAN-8, EAN-13, Code 11, Code BCD, Codabar a/t, Codabar b/n, Codabar c/*, Codabar d/e, UPC-A, UPC-E, UPC-2, UPC-5, Code 93, Code 128 (A-B-C), MSI, POSTNET
Character Sets: DEC VT100 Line Draw; IBM Set I, II, and All Character Set; 18 international character set substitution; IBM Code Page - 437, 850, 852, 863; ISO 8859-1, -2, -3, -4, -9; Roman 8; Mazowia (Poland)
Print Modes: Proportional, compressed, shadow, double strike, underline, expanded (2 to 8 times), superscript, subscript, oversize
Head Slew: 50 ips maximum
LF Interval: 35 msec at 6 lpi
Character Spacing: 10, 12, 13, 15, 16.7, 17.1, and 20 cpi, plus program selectable
Line Spacing: 3, 4, 6, and 8 lpi, plus n/144 in. program selectable
Front/Bottom Feed Rear/Manual Feed Forms Thickness Adjust
Paper Handling: Paper parking, auto top of form, zero-inch tear-off, paper out sensor, auto forms thickness adjustment (3840EP)
Paper Drive: 6-pin push tractors
Paper Dimensions: Continuous forms 3" to 16" W x 22" L maximum; single document insertion 3.5" to 17" W x 5" to 17" L with minimum W to L ratio of .45
Number of Copies: Original plus five in both front/bottom and rear paper path
Max. Forms Thickness: 0.025 in.
Genicom 3840EP Print Control
Margins: Left and right any position
Print Position: Absolute and relative HxV head position (Emulation dependent)
Emulations of the Genicom 3840EP Printer
ANSI X3.64, GENICOM 3410, Epson FX286e, IBM Proprinter III XL, IBM-GP, DEC LA210
Genicom 3840EP Printer Interfaces and Connectivity
CENTRONICS parallel - 36-pin Amphenol; speed: 3Kbytes/sec
EIA/TIA-232 (RS-232) serial - 25-pin type DB female; speeds: 110, 300, 600, 1200, 2400, 4800, 9600, 19200 baud
Options:RS-422, IBM Coax/Twinax, TCP/IP, Novell
Physical Qualities of the Genicom 3840EP Printer
Size (HxWxD): 12.1 x 26.9 x 13.9 in. (296 x 683 x 353 mm)
Acoustics: 55 dBa in quiet mode (3810S: 58 dBa)
Genicom 3840EP Printer Operating Environment
Voltage: 115 or 230 ±15% externally selectable; 50 or 60 Hz ±2 Hz
Standby: 35 watts (120 BTU/Hr)
Printing: 130 watts (433 BTU/Hr)
Temperature: 50° to 104° F (10° to 40° C)
Reliability of the Genicom 3840EP Printer
MTBF: 10,000 hours @ 25% duty cycle
Workload: Up to 27,000 pages per month
MTTR: 30 min. by a qualified technician
Print Head: 700 million draft characters
Ribbon Life: 15 million draft characters
Genicom 3840EP Printer Ribbon
Type: Cartridge, clean hands, nylon fabric
Life: 15 million draft characters
Genicom 3840EP Printer Options
Questions about the Genicom 3840EP Printer?
|We can help. For more information about the Genicom 3840EP Printer, or any of our products and services, call us at 1.800.457.8499 or email us. ||
Buy With Confidence
| Related Products